Silicom's 10 Gigabit Ethernet PCI Express server adapters are designed for Servers and high-end appliances. The Silicom 10 Gigabit Ethernet PCI Express NICs offer simple integration into any PCI Express X8 to 10Gigabit Networks. The performance is optimized so that system I/O is not the bottleneck in high-performance networking applications.
The Silicom 10 Gigabit Ethernet PCI Express server adapters are based on Intel 82599ES Ethernet controller with two fully integrated Gigabit Ethernet Media Access Control (MAC) and SFI ports. Using hardware acceleration, the controller offloads tasks from the host, such as TCP/UDP/IP checksum calculations and TCP segmentation.Silicom's 10 Gigabit Ethernet PCI-Express Server adapters are the ideal solution for implementing multiple network segments, mission-critical high-powered networking applications and environments within high performance servers. SFP+ 10Gigabit Ethernet: 10Gigabit Ethernet Adapter with SFP cage support. Copper 10SFP+Cu (Passive Direct Attach Cable). Compliant with the SFP+ MSA SFF-8431 specification.
Fiber 10 Gigabit Ethernet 10GBASE-SR. 10BASE-SR with 10Gigabit 850nM Small form Factor Pluggable (SFP+). Fiber 10 Gigabit Ethernet 10GBASE-LR.
10BASE-LR with 10Gigabit 1310nM Small form Factor Pluggable (SFP+). Support PCI Express Base Specification 3.0 (8GT/sec).IPV4 and IPV6 Supports for IP/ TCP and IP/UDP Receive Checksum offload. Fragmented UDP checksum offload for Packet Reassembly. CPU utilization- the 82599 supports reduction in CPU utilization, mainly by supporting Receive Side Coalescing (RSC). Support for 16 virtual machine Device Queues (VMDq) per port.
Support Direct Cache Access (DCA). Advanced memory architecture reduces latency by preceding TSO packets. A TSO packet may be interleaved with other packets going to the wire. Minimized device I/O intterupts using MSI and MSI-X. Offload of TCP / IP / UDP checksum calculation and TCP segmentation.Large on chip receive packet buffer (512 KB). Large on chip transmit packet buffer (160KB). Supports the VPD (Vital Product Data) capability defined in the PCI specification ver. Time sync- IEEE1588- Precision Time Protocol (PTP).
Supports the BCN (Backward Congestion Notification) protocol in addition to the EEDC functionality. Supports a mode where all received and sent packets have at least one VLAN tag in addition to the regular tagging. IEEE 802.1p layer 2 priority encoding.
Jumbo Frame (up to 15.5KB). Link Aggregation and Load Balancing. TCP Segmentation Offload Up to 256KB. Ipv6 Support for IP/TCP Receive Checksum Offload.
LEDs indicators for link/Activity and speed. IEEE P802.1AE LinkSec specification. It incorporates an inline packet crypto unit to support both privacy and integrity checks on a packet by packet basis. The transmit data path includes both encryption and signing engines. On the receive data path it includes both decryption and integrity checkers.
IPsec off load for a given number of flows. Off-load IPsec for up to 1024 Security associations (SA) for each of TX and RX. AH and ESP protocols for authentication and encryption.
AES-128-GMAC and AES-GCM crypto engines. PCI-Express Base Specification Revision 3.0 (8 GTs). Low profile short add-in card: 165.15mm X 68.91mm (6.502"X 2.713").18W, 1.5A at 12V: Typical all ports operate at 10Gb/s, 17.64W, 1.47A at 12V: Typical No link at all ports. 18.12W, 1.51A at 12V: Typical all ports operate at 10Gb/s, 17.64W, 1.47A at 12V: Typical No link at all ports. 0°C - 45°C (32°F - 113°F). FCC Part 15, Subpart B Class A Conducted Emissions Radiated Emissions CE EN 55022: 1998 Class A Amendments A1: 2000; A2: 2003 Conducted Emissions Radiated Emissions CE EN 55024: 1998 Amendments A1: 2000; A2: 2003 Immunity for ITE Amendment A1: 2001 CE EN 61000-3-2 2000, Class A Harmonic Current Emissions CE EN 61000 3-3 1995, Amendment A1: 2001 Voltage Fluctuations and Flicker CE IEC 6100-4-2: 1995 ESD Air Discharge 8kV. CE IEC 6100-4-3:1995 Radiated Immunity (80-1000Mhz), 3V/m 80% A. By 1kHz CE IEC 6100-4-4:1995 EFT/B: Immunity to electrical fast transients 1kV Power Leads, 0.5Kv Signals Leads CE IEC 6100-4-5:1995 Immunity to conductive surges COM Mode; 2kV, Dif. Mode 1kV CE IEC 6100-4-6:1996 Conducted immunity (0.15-80 MHz) 3VRMS 80% A. By 1kHz CE IEC 6100-4-11:1994 Voltage Dips and Short Interruptions V reduc >95%, 30% >95% Duration 0.5per, 25per, 250per.
Storage solutions, power and testing equipment. We offer lowest prices on hard to find parts! Asset recovery and recycling services.Open: Mo-Fri 10:00am - 07:00pm CST. At the bottom of the listing there is a "Ask a question" link. If it doesn't work for you, our contact information is published on the world wide web. Please use you imagination and investigative skills.
The truth is out there! This item is in the category "Computers/Tablets & Networking\Computer Components & Parts\Interface/Add-On Cards\Network Cards". The seller is "techy_parts" and is located in this country: US. This item can be shipped worldwide.