Up to 550 MB/s sustained speeds. Enhance SATA 3Gb/s systems with SATA 6Gb/s support.
Give Your Mac Pro Tower or PC a 6G Performance Boost Accelsior S is the simple solution to add a high speed SATA 6G drive to PCs or silver Mac Pro towers otherwise restricted to 3G architecture. Combined with a high-performance SSD, Accelsior S brings cutting edge 6G performance to your SATA 3G system. Internal Storage Expansion at Lightning Speed With more than 500 MB/s of throughput, the Accelsior S dual- lane PCIe 2.0 card delivers flexible storage expansion - with a speed boost - to your Mac or PC.Accelsior S is the perfect complement to OWC's Mercury family of high-performance SSD's, allowing up to an extra 1TB of fast storage expansion. Just Plug and Play Mount a 2.5 drive to the Accelsior S, install in any available PCIe x4 (or greater) slot, and you're up and running with expanded high-speed storage. Use as a native, high-speed, boot drive or scratch-disk and boost capacity and performance. With no drivers or extra software needed, upgrading your PC or legacy Mac Pro tower with Accelsior S is a breeze. OWC Accelsior S is compatible with: Mac Pro Mid 2010 Quad-Core Model ID: MacPro5,1 Mac Pro 6-Core Model ID: MacPro5,1 Mac Pro 8-Core Model ID: MacPro5,1 Mac Pro 12-Core Model ID: MacPro5,1 Mac Pro Model ID's: MacPro4,1 MacPro3,1 MacPro2,1 MacPro1,1 Xserve Model ID's: Xserve2,1 Xserve1,1 Xserve Quad-Core Model ID: Xserve3,1 Xserve 8-Core Model ID: Xserve3,1 PC Desktops: Compatible with Intel / AMD Process based PCs capable with the specifications listed above. PCIe capable servers: Compatible with PCIe expandable servers with the specifications listed above.
OWC Mercury Helios Thunderbolt PCIe expansion chassis NOT COMPATIBLE: HP DL 380 G7, HP DL 380 G8, Dell PowerEdge R620, Dell PowerEdge T620 Drive Compatibility: When used together, the Accelsior S and the 2.0TB Mercury Electra 6G SSD are compatible with the MacPro4,1 series and MacPro5,1 series. This device combination is NOT compatible with the MacPro1,1 MacPro2,1 or MacPro3,1 series.Note about throughput: PC Throughput: PCIe 2.0 x4 slot or better is required. Use of a PCIe 1.0 x4 slot will reduce performance. Installing Accelsior S into any open x4 or x16 PCIe 2.0 slot will deliver full throughput 2008 Mac Pro. These models have two x16 PCIe 2.0 slots, which enable Acceslsior S to deliver full throughput. Installing Accelsior S into of the two x4 PCIe 1.0 slots will result in Accelsior S being addressed as a gen one, one-lane card with performance limited to real world 190-200MB/s data rates.
These models utilize PCIe 1.0 slot which cannot be configured (even with the Expansion Utility in OS X) to address Accelsior S as anything but as a first generation one-lane card. As a result, Accelsior S performance will be limited to 190-200MB/s data rates.
If maximum data rate speedis desired, we recommend the installation of a 2.5 OWC Mercury SSD in an open Mac Pro drive bay. Accelsior S Specifications: OWC Part Number: OWCSSDACL6G. S Interface: PCIe 2.0 x 2 AHCI Compliant: Yes, Plug and Play Installation, no drivers required RoHS Compliant: YES PCIe-SATA Bridge: ASM1062 Performance: Read: up to 550MB/s, Write: 530MB/s Operating system compatibility: Mac OS X 10.6 and up, Windows Server 2008 and higher, Not compatible as a Windows boot drive on a Mac Supported Mechanisms: All 2.5 HDD and SSD SATA 1.5, 3.0, 6.0Gb/s. Form Factor: full height, half length Operating Temp: 32°F to 158°F/0°C to 70°C Non-Operating Temp: 40°F to 185°F/40°C to 85°C Acoustics: 0.0 bels for both Idle and Seek Capacity: Card Only Brand: OWC MPN: SSDACL6G. S UPC: 812437021035 EAN: 0812437021035.By entering your model number. PCIe to 2.5" 6Gb/s SATA SSD Host Adapter, directly mount any standard 2.5" drive. Storage Expansion With a Speed Boost, Up to 550 MB/s sustained speeds. Install in any available PCIe x4 (or greater) slot-Use as a native, high-speed, boot drive or scratch-disk and boost capacity and performance.
No drivers or software needed, easily upgrade your PC or legacy Mac Pro tower. Product Dimensions: 1.9 x 8.7 x 6.3 inches. Item Weight: 4.8 ounces.
Now that's something worth shopping for! We strongly believe that customer experience is of utmost importance. That means having access to real people that gets your questions and concerns answered quickly. If you have any issues whatsoever with your order, simply let us know and we'll do everything in our power to make it right. Give us a shot and we will make sure that you will look to us again!The item "OWC Accelsior S PCIe Adapter for 2.5 SATA III SSD Drives Card. Free Shipping" is in sale since Friday, October 12, 2018.
This item is in the category "Computers/Tablets & Networking\Drives, Storage & Blank Media\Hard Drives (HDD, SSD & NAS)\Solid State Drives". The seller is "thecandidcow" and is located in Sarasota, Florida. This item can be shipped to United States.S